Mon - Fri | 8 - 5:30pm
Order before 1pm for same day despatch
24/7 365 days a year call out

Series 240 Regulators

Gas Pressure Regulator with Spring-loaded Measuring Unit and Reversing Lever.

  • Device for offtake stations in gas distribution as well as commercial and industrial facilities
  • Diaphragm casing can be rotated through 360° relative to regulator body (without vent limiting device)
  • Rapid response to load changes
  • Wide range of interchangeable orifices
  • Regulator can be installed in any position
  • Can be fitted with integral over-pressure (OPCO) or under-/over-pressure cut-off valve (UPCO/OPCO)
  • May be optionally fitted with a safety diaphragm and vent limiting device (VLD) for applications requiring no vent piping per ANSI Z21.80/CSA 6.22.
  • Cartridge-type diaphragm and valve assembly for ease of maintenance
  • Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry
  • Max. inlet pressure pu max up to 10.3 bar
  • Outlet pressure range Wd 0.01 to 0.21 bar
  • Temperature range: –40°C to +60°C

SSV setting range

  • Wdo 0.035 to 0.26 bar
  • Wdu 0.01 to 0.03 bar

Connection

  • Pipe screw connection R ¾", R 1"

Type

  • P – without internal Safety Relief Valve (SRV)
  • R – with internal Safety Relief Valve (SRV)
  • LR – internal SRV
  • SD - safety diaphragm
  • All mechanical components of this device are without ignition sources. As such, they are not subject to ATEX 95 (94/9/EC). All electrical components used with this device fulfil the ATEX requirements.

We have placed cookies on your device to help make this website better.

Your Basket